Flawless Nails at Light Speed.

The speed of applying pre-shaped full coverage soft gel tips can’t be beat, combined with the light speed curing of Gelish Gel. You’ve never created nails with anything faster that this!

Soft Gel Tip Adhesive:

Formulated with Foundation Base Technology, the formula you trust for maximum adhesion.

Non-damaging, LED Soak-Off formula for bubble-free maximum adhesion of Gelish Soft Gel Tips. Reinforced molecular structure for exceptional seal and wear without lifting.

Directions:

Apply to Gelish Soft Gel Tip after Gelish Tip Primer. Apply to Nail, LED Flash cure for 5 seconds, full cure for 30 seconds in Touch LED light or 60 seconds in 18G LED Light.Soak-Off for removal.

NOT AVAILABLE FOR SHIPMENT TO NEW ZEALAND

Directions to use

Prep Nails:

1. Sanitise – Wash hands with soap or alcohol spray. Dry.
2. Push cuticles – Push back skin and remove dead tissue from the nail plate.
3. Shape – File natural free edge short.
4. Buff – Rough up the nail surface until completely matte removing the shine
5. Cleanse – Wipe nails with alcohol to remove dust and oils.
6. pH Bond – Apply to natural nails and let air dry.

Prep Tips:

7. Size – Choose soft gel tip that fits wall-to-wall (file sides if needed).
8. Primer – Apply tip primer to underside of tip AND to natural nail.

Apply Tips:

9. Adhesive – Put a small bead of gel glue down the center of the tip.
10. Roll-on – Place tip at cuticle, push slightly toward cuticle, then roll down onto nail (no air bubbles).
11. Flash cure – Cure for 5 seconds to freeze in place. Repeat on all five fingers.
12. Full cure – Cure each nail for 60 seconds (LED) or 120 sec (UV).

Shape & Finish:

13. Refine – File the seam where tip meets natural nail until smooth.
14. Buff – Lightly scuff entire tip surface so polish sticks.
15. Cleanse – Wipe off dust with alcohol.
16. Polish – Apply base coat, 2 thin color coats, and top coat – cure between each layer (30-60 sec each).
17. Oil – Massage cuticle oil into skin and nails.

Safe Removal (Step-by-Step)

1. Sanitise – Wash hands.
2. Break seal – File/buff off the shiny top coat completely with a coarse file
3. Soak – Put acetone-soaked cotton on nail, wrap with foil or clip. Wait 15 minutes.
4. Lift – Gently push off softened gel with wooden stick. If it doesn't slide off easily, soak 5 more minutes – do NOT force it.
5. Buff – Lightly smooth the natural nail (don't over-file).
6. Oil – Apply cuticle oil and hand cream generously to rehydrate.

FAQ

How do you prep nails for soft gel tips?

A: Prepping begins with sanitizing the client’s hands and nails, then pushing back cuticles and removing excess tissue. The natural nails are shaped with a 240/240 thin wooden file, the shine is gently removed using a 100/180 grit buffer, and the surface is cleansed with Nail Surface Cleanse on a lint‑free wipe. Finally, a thin coat of pH Bond nail prep is applied before sizing and priming the tips.

What’s the correct way to apply soft gel tips?

A: The process starts by applying tip primer to both the underside of all ten sized soft gel tips and the natural nails. A liberal amount of adhesive is placed on the tip’s contact area, then the tip is rolled onto the nail from the cuticle toward the free edge with constant pressure to avoid bubbles. After a 5‑second flash cure under a touch LED light, all five fingers are cured for 60 seconds in an 18G LED light before refining edges, buffing, cleansing, and finishing with lacquer or gel polish and top coat.

How is Gelish soft gel removed safely?

A: Removal begins with sanitizing, taking off any lacquer, and reducing nail length. If soak‑off gel was used, the top seal is broken by lightly roughing the surface with a 100/180 grit buffer or reducing bulk with a Go File. Cotton pads or foil wraps saturated with artificial nail remover are applied for 15 minutes, after which softened gel is gently pushed away; soaking can be repeated if needed. The process ends with light buffing and massaging cuticle oil into the surrounding skin.